• Steinernema feltiae

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Heterorhabditis bacteriophora

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Steinernema carpocapsae

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Capyphor

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Larvanem

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Capsanem

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• Entonem

  especially if finer than 0.3 mm (50 mesh) Use a maximum pressure of 20 bar/290 psi (on nozzle) The spray nozzle opening should be at least 0.5 mm (500 microns

• FAQ Nematodes

  and the spray boom? The pressure on the nozzle may not exceed 20 bar (190 psi), with conventional large volume nozzles. Why should the soil be wet before/after