Rollertrap

Type:
Sticky ribbon with wet glue
Type:
Yellow or blue sticky PE ribbon
Product category:
Monitoring
Rollertrap_productshot.jpg

Use for

Use for

When to use Rollertrap

Use Rollertrap to trap white fly, leaf-miner, aphid, thrips and fungus gnats in spots with a great pest pressure or areas in the greenhouse where a high pest pressure is expected, for example along gables, ventilation windows and (other) draughty places.

How it works

How it works

How does Rollertrap work?

Pests are attracted to the yellow or blue colour of the sticky ribbon and get caught in the glue.

Product specifications

Product specifications

Colour: yellow
Rolls of:

  • 15 cm x 100 m
  • 5 cm x 100 m
  • 15 cm x 500 m
  • 30 cm x 100 m

Directions for use

Directions for use

Application Rollertrap

Before hanging up, make sure the Rollertraps are at least at room temperature. The glue will be softer and the traps will unroll easier.

Instructions for usage:

  • Place Rollertrap in areas where high pest pressure is expected, such as gables, ventilation windows and places of draft.
  • Rollertrap should be hung above the crop when the crop is still low. In ornamental crops you can use ROLLERTRAP year round. In tall crops such as cucumber, tomato and pepper, the best time for placement is either just before or after the first planting.
  • Attach the Rollertrap to crop wires, greenhouse poles, or other supportive structures.
  • Place the Rollertrap approximately 25 cm above the crop for the small Rollertrap and 40 cm for large Rollertrap
  • To assist with placement, insert a rod or other expedient through the center opening of the roll which will allow the Rollertrap to spin freely while unrolling.
  • At the beginning and end of each run, cut the trap approximately 40 cm longer than the support structure. Wrap the extra around the support and secure with staples or clips. It may be necessary to secure the Rollertrap mid run to provide additional support.
  • It is recommended to replace the Rollertrap after five months.
  • For additional recommendations and rates, contact your local Koppert Biological Systems representative.

The information given below is merely indicative. Tailored advice can be provided if information is available on the local factors that need to be taken into account, such as the crop, the climate conditions and the level of infestation. For the correct approach, please consult a Koppert specialist or a recognized distributor of Koppert products.

Rollertrap preventive light curative heavy curative
Rate - 1/1000 m² 1/500 m²
m²/unit - 1000 500
interval (days) - - -
Frequency - - -
Remarks - - -

Best working conditions Rollertrap

Rollertraps should preferably be installed when the crop is still low. When it comes to ornamental crops, you can use the Rollertraps basically year-round, but with vegetable crops you best install them after the first planting or just before planting. It is advised to use one Rollertrap per two or three greenhouse bays and depending on the pest pressure (to be expected) choose small or large Rollertraps.

Product handling

Product handling

Handling

Koppert B.V. is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions.

"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Check local registration requirements. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."

Need help?

Get in touch with the expert

Want to know more about our company and products? Get in touch with one of our experts.
We produce our products and solutions for professional growers in horticulture.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service.