FAQ Nematodes

there is any doubt, remove all filters. What pressure can be on the pump and the spray boom? The pressure on the nozzle may not exceed 20 bar (190 psi) [...] water, the total volume of the suspension must be sprayed immediately. Therefore a suspension cannot be saved. If the suspension is not mixed, the nematodes [...] insects can be host to this group of nematodes. By far the most nematodes belong to the group of saprophytes. These nematodes are harmless and live of dead organic

Mycotal FAQ

during the day. Humidity levels must be 70%(RH) at the moment of application and a couple of hours after the application. The humidity within the leaf canopy [...] can be formed on the outside of the affected insect which may infect other vulnerable pests. Is the effect visible? Dead, shriveled insects can be found [...] penetrate the pest’s body cavity. Here they proliferate and destroy the tissues, killing the insect. At high humidity, the fungus then grows through the insect

General Conditions Koppert

damage as a result of loss of harvest, crop damage and/or damage due to deterioration of the structure of the soil. The payments of damages claimed shall [...] I n case of liquidation, insolvency, suspension of payments, bankruptcy, transfer of business or merger or divestment of the Buyer; vesting of a pledge [...] any circumstance beyond the control of the parties F as a result of which the compliance with and/or timely performance of the agreement can no longer

Spidex Vital FAQ

Changes of Spidex What is the difference in the product presentation? Spidex Vital consists of all mobile stages of Phytoseiulus persimilis. The carrier [...] colour than the Spidex I’m used to? During production of Spidex Vital the predatory mites don`t get to eat spider mites, which cause the coloration of Spidex [...] Hotspots of spider mite are even better under control with Spidex Vital, compared to the regular Spidex. Does anything change to the rate of application

Pollination checklist Growing lights

pollination. The sun activates the bumblebees 09:00 08:00 Keep the hives closed during one day of snowfall. If possible, remove the snow from the roof. 07:00 [...] sure the hives are not overheated by the lamps and other means, or by the sun in spring and late autumn. The later the lights are turned on, the more [...] connecting the transmitter to the climate computer. Heat Do not turn the lights on before midnight Screens and filters Place the Natupol hive with the WBH

Mycotal Brochure

humidity of 70% or above. The microclimate of the laminar layer underneath leaves determines the conditions for the fungus. Mode of action 4 Spores of A. [...] sign of pest infestation 20 3. Use an appropriate amount of water to ensure a good wetting of the leaves, pH of spray solution should be between 4 and [...] proteins by the fungus within the insect At high humidity, the fungus grows from within through the insect cuticle and produces spores on the outside of the dead

Manual Growing lights

after 10:00 in the morning, depending on the system you use to control the opening or closing of the hives. The bumblebee hives should be closed 2 hours [...] Koppert hive support can be used to place the hives at the correct height. The transmitter of the Wireless BeeHome system can be controlled in different ways [...] greenhouse, for example on the sidewalls, also take the angle of the sun into account. It can happen that the direction of the sunbeams is too low and therefore

Manual Wireless Beehome

training The user must be familiar with the correct method of using the Wireless BeeHome system. NOTE! The user must read the full contents of these i [...] Plug the supplied timer into the power socket on the transmitter casing. Insert the plug of the short cable coming out of the transmitter into the timer [...] pulse), the • symbol ‘-’ will be used in the text. The general menu settings of the transmitter: 1. Must be set to 1. 2. This can be used to set the frequency

MATERIAL SAFETY DATA SHEET MSDS

according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR. 16. OTHER INFORMATION SIGNIFICATION OF ABBREVIATIONS: [...] General: Protective clothing should be selected according to the conditions likely to be encountered in the workplace. Applicators should follow label instructions [...] INFORMATION The above information is accurate and reliable to the best of our knowledge, to date. However, this information should not be interpreted as

Viridis SDS 2017-04 EN FR

according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR. 16. OTHER INFORMATION SIGNIFICATION OF ABBREVIATIONS: [...] General: Protective clothing should be selected according to the conditions likely to be encountered in the workplace. Applicators should follow label instructions [...] INFORMATION The above information is accurate and reliable to the best of our knowledge, to date. However, this information should not be interpreted as