Pollination checklist Growing lights

Pollination checklist Placement High & horizonal Growing lights in tomato crops Light timetable Points of attention 19:00 Snow 18:00 Place hives [...] pollination, bumblebees need at least 28 Watt/m2 PAR light near the hive and the presence of Ultraviolet light. Automatic opening systems Automatic Opening Systems [...] plant rows longer than 100 meters. 01:00 Flowers open 1 hour after the lights are turned on 02:00 00:00 Daylight From week 47 until week 52 introduce

Manual Growing lights

time, when (UV)light levels are already low, growing lights (SON-T) are often used. These lights spread a lot of light in the yellow/red light spectrum, which [...] but do not see in the red light spectrum. Conversely, humans do see in the red light spectrum but also in the green and blue light spectrum (see figure 1 [...] Natupol Excel hive. 4 2 Placement of hives when using growing lights When using growing lights, we advise to place the hives high in the greenhouse (above

Manual Wireless Beehome

same time as grow lights are used (for tomato cultivation, for instance). These grow lights compensate for the lower levels of UV light in the winter months [...] months and dominate the natural light. This affects the bumblebees’ ability to orientate themselves, which in turn has a negative impact on pollination. [...] bumblebees can only leave the hive at times at which there is enough natural light for them to navigate effectively. This improves the pollination results and

MATERIAL SAFETY DATA SHEET MSDS

using the toilet. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Odor: Light to medium brown fine liquid Fermentation odor Melting Point: Not Applicable

Viridis SDS 2017-04 EN FR

using the toilet. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Odor: Light to medium brown fine liquid Fermentation odor Melting Point: Not Applicable

MATERIAL SAFETY DATA SHEET MSDS

using the toilet. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Odor: Light to medium brown fine liquid Fermentation odor Melting Point: Not Applicable

Natutec_Airobreez_-_Directions_for_Use_-_Koppert.pdf

14 C Power connection Identification sticker B C D Power indication lights Test button Working principle 4 - 003 - Description The operator holds [...] section 1.7. 2. Push the test button on the battery. The power indication lights come on. 3. Find out how long you can use the device. Refer to section 9 [...] connection (B). 3. Connect the charger to an outlet. 4. Look at the indicator lights (C) to know when the battery is fully charged. A B Caution: Disconnect